1. You have 2 VPC VPCA (1 72.16.0.0/16) and VPCB (10.0.0.0/16). You are going to set up a VPC connecting peering. What must be added to the route table as well as the VPC of the following routes: To assure communication all over the VPC Select 2 response options below.. It is assumed that the target VPC peering agreements connection ID is one PCX-122(Select 2answers)

A) The route table VPCB add a route to 10.0.0.0/16 and Target PCX-one 122
B) The route table VPCA add a route to 172.16.0.0/16 and Target PCX-one 122
C) The route table VPCB add a route to 172.16.0.0/16 and Target PCX-one 122
D) The route table VPCA add a route to 10.0,0.0 / 16 and Target pcx1 122



2. The company plans to experiment with Amazon workspaces account. They will show a set of workstations fixed IP addresses for this purpose. They have to ensure that only those IP addresses have access to the Amazon Workspaces. How can you achieve this?

A) None
B) Specify P addresses the security group
C) Place the front of the WAF Amazon Workspaces
D) Specify P addresses NaCl
E) Create access control P group


3. You are trying to make some of the cleaning and to remove some of the unwanted connection. You are attempting to remove the connector manually, with the following cell Id VPC-1 a2b3c4d, private IP addresses are private DNS name: IP-20-O-2-227.ec2.internal, Primary: true private IP address: 2 O .O.2227 Requester Managed true, but you can not delete interface. What is the reason, why you can not remove the connection?

A) None
B) Therefore, it is a private DNS name attached
C) Therefore, it is a private IP address is fixed
D) It'S because of its attached VPC
E) It is because the requester is successful user interface


4. The company is currently the VPC and the AWS(Amazon Web Service) AWS Direct Connect connection. They need to transfer data from on-premise channel location VPC and most secure way possible. You need to ensure the confidentiality and integrity of your VPC. 3 of which steps would you take to implement?

A) None
B) Setup a public VIF using AWS(Amazon Web Service) Direct Connect connection
C) Attach the VPC Virtual Private port
D) Create an IPSec tunnel client gateway and virtual private gateway
E) Setup a private VIP using AWS(Amazon Web Service) Direct Connect connection


5. You're working as a consultant company, which is a three-tier application. The application layer of this architecture to send over 20Gbps of data per second at peak times, and Amazon S3. At the moment, you are using two NAT gateways in two sub-networks to transfer data from your application level in Amazon S3. You also need to ensure that the cases will receive software fixes in the archives of a third party. What architectural changes should be made, if any?

A) Add to a better performance Internet gateway
B) Add a VPN connection for better performance
C) More VPC endpoint.
D) None
E) Add another NAT gateway