1. You have 2 VPC, VPC, A and B. Both the VPC VPC is peering. You have entered the VPC route tables so that traffic can flow VPCA and VPCB. You are trying to ping, for example, VPCB from VPCA, but are unable to do so. Making sure that the NaCl groups and security is configured on the property. What could be the cause of this problem?

A) Security groups are not working peeked VPC'S so requests will not work.
B) VPC is a duplication of CIDR blocks
C) NACLA don'T job peeked VPC so requests will not work.
D) Route tables VPCB has not been determined.
E) None


2. The company plans to use the EC2 instance that is used to route the VPN traffic from on-premise data center. In such a situation, what belongs to AWS?

A) The high availability VPN connection
B) Configuration The IPSec protocol
C) None
D) Ensuring the health of underlying physical host
E) The high availability EC2 Instance


3. You are responsible for the establishment of AWS(Amazon Web Service) Direct Connect connection between OnPremise data center and AWS(Amazon Web Service) Partner spot. You need to ensure that the network can support the connection. What to keep in check this. Select 3 response options below(Select 3answers)

A) The AC adapter must support static routing
B) Port auto-negotiation must be disabled for the network device
C) The AC adapter must support BGP
D) The network must support 802.1Q VLAN



4. You are using Windows Server 2012 on-premises location as a customer gateway. You have to setup a VPN gateway and VPN connection. You also have to setup a VPN configuration in Windows Server 2012 machine. But when you check the status of the tunnel AWS(Amazon Web Service) Console, it still shows one down. What must be done so that the tunnel is UP mode. ?

A) Ensuring the BGP protocol is configured for Windows Server 2012 device
B) Give to the ping request to a Windows Server 2012-unit
C) None
D) From the AWS(Amazon Web Service) Console, select the VPN gateway. Click the implementation of the thematic priorities> Import tunnel
E) From the AWS(Amazon Web Service) Console, select the VPN connection, click the implementation of the thematic priorities> Import tunnel


5. You work in an organization that is a Direct Connect connection and a backup VPN connection. This has been a very recent setup. Then, setting it up, the traffic still favors instead a VPN connection Direct connection. You've pretended for a longer AS_PATH a VPN connection, but even so, this connection is preferable. What steps below can be used to ensure the Direct Connect connection is used?.

A) In the crease MED real estate VPN connection.
B) Advertises a well-defined prefix is a VPN connection
C) Remove pretended AS_PATH.
D) None
E) Configures VPN static rather than dynamic VPN.