1. Right Answer: A
Explanation: Audit undertaken to confirm whether a firm is following the rules and regulations (prescribed by its internal authority or control system) applicable to an activity or practice.Compliance testing is basically an audit of a system carried out against a known criterion. A compliance test may come in many different forms dependent on the request received but basically can be broken down into several different types:Operating Systems and Applications: A verification that an operating system and/or applications are configured appropriately to the companies needs and lockdown requirements, thus providing adequate and robust controls to ensure that the Confidentiality, Integrity and Availability of the system will not be affected in its normal day to day operation.Systems in development: A verification that the intended system under development meets the configuration and lockdown standards requested by the customer.Management of IT and Enterprise Architecture: A verification that the in-place IT management infrastructure encompassing all aspects of system support has been put in place. This is to ensure effective change control, audit, business continuity and security procedures etc. have been formulated, documented and put in place.Interconnection Policy: A verification that adequate security and business continuity controls governing the connection to other systems, be theyTelecommunications, Intranets, Extranets and Internet etc. have been put in place, have been fully documented and correspond to the stated customer requirements.The following answers are incorrect:Substantive testing - A procedure used during accounting audits to check for errors in balance sheets and other financial documentation. A substantive test might involve checking a random sample of transactions for errors, comparing account balances to find discrepancies, or analysis and review of procedures used to execute and record transactions.Sanity testing - Testing to determine if a new software version is performing well enough to accept it for a major testing effort. If application is crashing for initial use, then system is not stable enough for further testing and build or application is assigned to fix.Recovery testing '' Testing how well a system recovers from crashes, hardware failures, or other catastrophic problems.The following reference(s) were/was used to create this question:CISA review manual 2014 page number 52 and 53http://www.wikijob.co.uk/wiki/substantive-testing

2. Right Answer: A
Explanation: Compliance, financial, operational, forensic and integrated are different types of audit.For your exam you should know the information below:What is an audit?An audit in general terms is a process of evaluating an individual or organization's accounts. This is usually done by an independent auditing body. Thus, audit involves a competent and independent person obtaining evidence and evaluating it objectively with regard to a given entity, which in this case is the subject of audit, in order to establish conformance to a given set of standards. Audit can be on a person, organization, system, enterprise, project or product.Compliance Audit -A compliance audit is a comprehensive review of an organization's adherence to regulatory guidelines. Independent accounting, security or IT consultants evaluate the strength and thoroughness of compliance preparations. Auditors review security polices, user access controls and risk management procedures over the course of a compliance audit. Compliance audit include specific tests of controls to demonstrate adherence to specific regulatory or industry standard. These audits often overlap traditional audits, but may focus on particular system or data.What, precisely, is examined in a compliance audit will vary depending upon whether an organization is a public or private company, what kind of data it handles and if it transmits or stores sensitive financial data. For instance, SOX requirements mean that any electronic communication must be backed up and secured with reasonable disaster recovery infrastructure. Health care providers that store or transmit e-health records, like personal health information, are subject to HIPAA requirements. Financial services companies that transmit credit card data are subject to PCI DSS requirements. In each case, the organization must be able to demonstrate compliance by producing an audit trail, often generated by data from event log management software.Financial Audit -A financial audit, or more accurately, an audit of financial statements, is the verification of the financial statements of a legal entity, with a view to express an audit opinion. The audit opinion is intended to provide reasonable assurance, but not absolute assurance, that the financial statements are presented fairly, in all material respects, and/or give a true and fair view in accordance with the financial reporting framework. The purpose of an audit is to provide an objective independent examination of the financial statements, which increases the value and credibility of the financial statements produced by management, thus increase user confidence in the financial statement, reduce investor risk and consequently reduce the cost of capital of the preparer of the financial statements.Operational Audit -Operational Audit is a systematic review of effectiveness, efficiency and economy of operation. Operational audit is a future-oriented, systematic, and independent evaluation of organizational activities. In Operational audit financial data may be used, but the primary sources of evidence are the operational policies and achievements related to organizational objectives. Operational audit is a more comprehensive form of an Internal audit.The Institute of Internal Auditor (IIA) defines Operational Audit as a systematic process of evaluating an organization's effectiveness, efficiency and economy of operations under management's control and reporting to appropriate persons the results of the evaluation along with recommendations for improvement.Objectives -To appraise the effectiveness and efficiency of a division, activity, or operation of the entity in meeting organizational goals.To understand the responsibilities and risks faced by an organization.To identify, with management participation, opportunities for improving control.To provide senior management of the organization with a detailed understanding of the Operations.Integrated Audits -An integrated audit combines financial and operational audit steps. An integrated audit is also performed to assess overall objectives within an organization, related to financial information and asset, safeguarding, efficiency and or internal auditors and would include compliance test of internal controls and substantive audit step.IS Audit -An information technology audit, or information systems audit, is an examination of the management controls within an Information technology (IT) infrastructure.The evaluation of obtained evidence determines if the information systems are safeguarding assets, maintaining data integrity, and operating effectively to achieve the organization's goals or objectives. These reviews may be performed in conjunction with a financial statement audit, internal audit, or other form of attestation engagement.The primary functions of an IT audit are to evaluate the systems that are in place to guard an organization's information. Specifically, information technology audits are used to evaluate the organization's ability to protect its information assets and to properly dispense information to authorized parties. The IT audit aims to evaluate the following:Will the organization's computer systems be available for the business at all times when required? (known as availability) Will the information in the systems be disclosed only to authorized users? (known as security and confidentiality) Will the information provided by the system always be accurate, reliable, and timely?(measures the integrity) In this way, the audit hopes to assess the risk to the company's valuable asset (its information) and establish methods of minimizing those risks.Forensic Audit -Forensic audit is the activity that consists of gathering, verifying, processing, analyzing of and reporting on data in order to obtain facts and/or evidence - in a predefined context - in the area of legal/financial disputes and or irregularities (including fraud) and giving preventative advice.The purpose of a forensic audit is to use accounting procedures to collect evidence for the prosecution or investigation of financial crimes such as theft or fraud.Forensic audits may be conducted to determine if wrongdoing occurred, or to gather materials for the case against an alleged criminal.The following answers are incorrect:Compliance, financial, operational, forensic and integrated are different types of audits. G9, SA1 and capability are not the audit types.The following reference(s) were/was used to create this question:CISA Review Manual 2014 Page number 47http://searchcompliance.techtarget.com/definition/compliance-audit http://en.wikipedia.org/wiki/Financial_audit http://en.wikipedia.org/wiki/Operational_auditing http://en.wikipedia.org/wiki/Information_technology_audit http://www.investorwords.com/16445/forensic_audit.html

3. Right Answer: A
Explanation: The NOT keyword is used in the question. You need find out an option which is NOT an example of statistical sampling. Statistical sampling is NOT based onHaphazard sampling.For your exam you should know the information belowAudit samples are selected for the purpose of collecting representative evidence to be subjected to either compliance testing or substantive testing. The auditor should consider a selection technique that will provide the most relevant evidence supported by appropriate analytical procedures.Two basic types of audit samples can be designed by the auditor to fulfill their requirements: statistical and no statistical. Below Figure shows the various audit samples, as well as their testing methods. Care is given to the selection process in order to avoid drawing the wrong conclusion from the wrong sample. This is referred to as a sampling risk. Let's look at each of these samples more closely.Statistical Sampling -Statistical sampling uses mathematical techniques that result in an outcome that is mathematically quantifiable. Statistical samples are usually presented as a percentage. The purpose of statistical sampling is to gain an objective representation. Samples are selected by an objective mathematical process. The auditor should be aware that if the client has strong internal controls, the sample sizes may be smaller because the odds of fraud or failure will be lower.Examples of statistical sampling include the following:Random sampling Samples are selected at random.Cell sampling Random selection is performed at predefined intervals.Fixed interval sampling The sample existing at every n + interval increment is selected for testing.No statistical Sampling -No statistical sampling is based on the auditor's judgment (also referred to as judgmental sampling). The auditor determines the sample size, the method of generating the sample, and the number of items to be analyzed. The results of judgmental sampling are unlikely to represent the actual population. This is a subjective process usually based on elements of risk or materiality. An example of no statistical sampling includes haphazard sampling, in which the samples are randomly drawn for testing.After the samples are selected, the next step is to perform compliance tests or substantive testing.Conducting Audit Testing As stated earlier, the basic test methods used will be either compliance testing or substantive testing. Appropriate audit samples will have to be generated for the test.Compliance Testing -Compliance testing tests for the presence or absence of something. Compliance testing includes verifying that policies and procedures have been put in place, and checking that user access rights, program change control procedures, and system audit logs have been activated. An example of a compliance test is comparing the list of persons with physical access to the data center against the HR list of current employees.Compliance testing is based on one of the following types of audit samples:Attribute sampling Generally popular in compliance testing. The objective is to determine whether an attribute is present or absent in the subject sample. The result is specified by the rate of occurrence''for example, the presence of 1 in 100 units would be 1 percent.Stop-and-go sampling Used when few errors are expected. Stop-and-go allows the test to occur without excessive effort in sampling and provides the opportunity to stop testing at the earliest possible opportunity. It is a simple form of testing to reinforce any claim that errors are unlikely in the sample population.Discovery sampling A 100 percent sampling used to detect fraud or when the likelihood of evidence existing is low. Forensics is an excellent example of discovery sampling. This is an attempt to discover evidence.Precision, or expected error rate The precision rate indicates the acceptable margin of error between audit samples and the total quantity of the subject population. This is usually expressed as a percentage, such as 5 percent. To obtain a very low error rate, it is necessary to use a very large sample in testing.Auditors are justified in using a smaller sample size when the total population is expected to be error-free. A larger sample is required when errors are expected to be present in the population. The larger sample can yield a higher average. When errors are expected, the auditor must examine more data to determine whether the actual errors are within a tolerable error rate (maximum errors you would accept).Error levels may be determined by reviewing the findings of a prior audit and by considering changes in the organization's procedures. Use the risk-based audit strategy to determine whether your samples and tests are telling the truth about the audited.Substantive Testing -Substantive testing seeks to verify the content and integrity of evidence. Substantive tests may include complex calculations to verify account balances, perform physical inventory counts, or execute sample transactions to verify the accuracy of supporting documentation. Substantive tests use audit samples selected by dollar value or to project (forecast or estimate) a total for groups with related characteristics.Substantive testing is based on one of the following types of audit samples:Variable sampling Used to designate dollar values or weights (effectiveness) of an entire subject population by prorating from a smaller sample. Consider the challenge of counting large volumes of currency by its weight. Variable sampling could be used to count currency by multiplying the physical weight of one unit by the total weight of the combined sample, and then multiplying by the face value printed on the bill or coin. A demonstration is a single $50 bill weighing 1.0 gram, with the entire sample of $50 bills weighing 61 grams altogether. The combined sample weight would indicate a total quantity of 61 bills for an estimated dollar value of $3,050. This is a common technique for forecasting quantity and value of inventory based on particular characteristics.Unsatisfied mean estimation Used in an attempt to project an estimated total for the whole subject population.Stratified mean estimation Used to calculate an average by group, similar to demographics, whereby the entire population is divided (stratified) into smaller groups based on similar characteristics.Examples are teenagers from the ages of 13 to 19, people from the ages of 20 to 29, people from the ages of 30 to 39, and those who are male or female, smokers or nonsmokers, and so on. Difference estimation Used to determine the difference between audited and unaudited claims of value.The following answers are incorrect:The other options like Random Sampling, Cell Sampling and Fixed Interval Sampling are examples of Statistical sampling.The following reference(s) were/was used to create this question:CISA review manual 2014 page number 55 to 56CISA certified information system auditor study guide Second Edition Page Number 98 to 101

4. Right Answer: A
Explanation:

5. Right Answer: B
Explanation: