CA Foundation Business Economics Questions 2023 - Part 32
Fri, 03 Mar 2023
1. After answering a service call, you find a customer-s computer is dead. Which of the following checks would you perform first?
A) A. Check to see if the power supply is functional.
B) B. Check the CMOS battery.
C) C. Check the AC outlet voltage.
D) D. Check for excessive EMI.
2. You are at a customer site and have been asked to configure a second monitor on a laptop computer. You go to the display properties and ____________.
A) A. Click on monitor 2 and select Extend My Desktop
B) B. Select the dual monitor tab and configure Dual monitor Mode
C) C. Select the Adapter Tab and set Dual monitor status to On
D) D. Click on Monitor 1 and drag to monitor 2
3. The internal 802.11b/g Wireless network card on your new laptop needs to be replaced. Which type of device would you expect as a replacement part from the factory?
A) A. USB
B) B. Mini-PCIe
C) C. IEEE1394
D) D. Bluetooth
4. IP addresses that are assigned to a node each time it connects to the network are called ____ IP addresses.
A) A. Dynamic
B) B. Static
C) C. Variable
D) D. Reserved
5. You are setting up a conference room to support 15 users who usually work on the same floor as the conference room. You have been given a wireless router to make sure everyone has a solid connection. In order to ensure the minimum disruption to their service, what service would you disable on the new router?
A) A. DNS
B) B. SMTP
C) C. DHCP
D) D. NFS
A) A. Check to see if the power supply is functional.
B) B. Check the CMOS battery.
C) C. Check the AC outlet voltage.
D) D. Check for excessive EMI.
2. You are at a customer site and have been asked to configure a second monitor on a laptop computer. You go to the display properties and ____________.
A) A. Click on monitor 2 and select Extend My Desktop
B) B. Select the dual monitor tab and configure Dual monitor Mode
C) C. Select the Adapter Tab and set Dual monitor status to On
D) D. Click on Monitor 1 and drag to monitor 2
3. The internal 802.11b/g Wireless network card on your new laptop needs to be replaced. Which type of device would you expect as a replacement part from the factory?
A) A. USB
B) B. Mini-PCIe
C) C. IEEE1394
D) D. Bluetooth
4. IP addresses that are assigned to a node each time it connects to the network are called ____ IP addresses.
A) A. Dynamic
B) B. Static
C) C. Variable
D) D. Reserved
5. You are setting up a conference room to support 15 users who usually work on the same floor as the conference room. You have been given a wireless router to make sure everyone has a solid connection. In order to ensure the minimum disruption to their service, what service would you disable on the new router?
A) A. DNS
B) B. SMTP
C) C. DHCP
D) D. NFS
1. Right Answer: C
Explanation: Never overlook the obvious! Perform problem determination by checking all connections first, and that includes power connections. If you find that the PC is plugged in, then your next step would be to verify the power supply as that also could cause a dead computer.
2. Right Answer: A
Explanation: To set up dual monitors in Windows 7 you select the Extend My Desktop check box. This allows both monitors to be treated as a single large workspace. When extended the entire display area can be utilized and you can drag active windows between them seamlessly. The other options given are not available.
3. Right Answer: B
Explanation: The mini-PCIe slot is an internal laptop connection. It is usually accessed through a small access panel. USB and PCMCIA 802.11b/g adapters are available, but these are external devices.
4. Right Answer: A
Explanation: A DHCP server assigns IP addresses to client computers every time they request it. The computer that participates in a network asks for its IP address at startup. This is very often used in enterprise networks to reduce the configuration effort.
5. Right Answer: C
Explanation: Since all of the users are in the same general area, it is best to leave as much of their network configuration information unchanged as possible. As you know the router and the client use DHCP to negotiate IP address leases based on signal strength and quality. So by design, the client will negotiate with the server a few feet away over its normal configuration. This could cause problems with any statically assigned devices that the new router is not configured for.
Explanation: Never overlook the obvious! Perform problem determination by checking all connections first, and that includes power connections. If you find that the PC is plugged in, then your next step would be to verify the power supply as that also could cause a dead computer.
2. Right Answer: A
Explanation: To set up dual monitors in Windows 7 you select the Extend My Desktop check box. This allows both monitors to be treated as a single large workspace. When extended the entire display area can be utilized and you can drag active windows between them seamlessly. The other options given are not available.
3. Right Answer: B
Explanation: The mini-PCIe slot is an internal laptop connection. It is usually accessed through a small access panel. USB and PCMCIA 802.11b/g adapters are available, but these are external devices.
4. Right Answer: A
Explanation: A DHCP server assigns IP addresses to client computers every time they request it. The computer that participates in a network asks for its IP address at startup. This is very often used in enterprise networks to reduce the configuration effort.
5. Right Answer: C
Explanation: Since all of the users are in the same general area, it is best to leave as much of their network configuration information unchanged as possible. As you know the router and the client use DHCP to negotiate IP address leases based on signal strength and quality. So by design, the client will negotiate with the server a few feet away over its normal configuration. This could cause problems with any statically assigned devices that the new router is not configured for.
0 Comments
Leave a comment
Categories
Recent posts
CA Foundation Business Economics Questions 2023 - Part 31
Fri, 03 Mar 2023
CA Foundation Business Economics Questions 2023 - Part 30
Fri, 03 Mar 2023
