CA Foundation Business Economics Questions 2023 - Part 32
Fri, 03 Mar 2023
Inspirational journeys
Follow the stories of academics and their research expeditions
Comptia Network + 2023 Questions and answer - Part 19
1. Which of the following MUST be implemented to share metrics between routing protocols within the same router?
A) A. Routing loop
B) B. Routing table
C) C. Route redistribution
D) D. Dynamic routes
2. An engineer is reviewing the implementation requirements for an upcoming project. The basic requirements identified by the customer include the following:- WLAN architecture supporting speeds in excess of 150 Mbps- Clientless remote network access- Port-based network access controlWhich of the following solution sets properly addresses all of the identified requirements?
A) A. 802.11a, IPSec VPN, 802.1x
B) B. 802.11ac, MPLS, 802.3
C) C. 802.11b, PPTP, 802.1x
D) D. 802.11g, MS-CHAP, 802.16
E) E. 802.11n, SSL-VPN, 802.1x
3. Which of the following is used to classify network data for the purpose of providing QoS?
A) A. STP
B) B. VLANs
C) C. SIP
D) D. DSCP
4. Users are reporting their network is extremely slow. The technician discovers pings to external host have excessive response times. However, internal pings to printers and other PCs have acceptable response times. Which of the following steps should the technician take NEXT?
A) A. Determine if any network equipment was replaced recently
B) B. Verify malware has not disabled the users' PC firewalls
C) C. Replace users' network cables with known-good network cables
D) D. Power cycle the web server
5. A contractor is setting up and configuring conference rooms for a convention. The contractor sets up each room in the conference center to allow wired Internet access going to individual tables. The contractor measured the distance between the hotel's patch panel to the jack, and the distance is within Cat 5e specifications. The contractor is concerned that the room will be out of specification if cables are run in each room from the wall jacks. Which of the following actions should the contractor take to ensure the cable runs meet specifications and the network functions properly?
A) A. Place a switch at the hotel's patch panel for connecting each room's cables
B) B. Place a switch on each table to ensure strong connectivity
C) C. Place repeaters between the patch panel and the rooms
D) D. place a switch at the wall jack and run the cables in the room from there
A) A. Routing loop
B) B. Routing table
C) C. Route redistribution
D) D. Dynamic routes
2. An engineer is reviewing the implementation requirements for an upcoming project. The basic requirements identified by the customer include the following:- WLAN architecture supporting speeds in excess of 150 Mbps- Clientless remote network access- Port-based network access controlWhich of the following solution sets properly addresses all of the identified requirements?
A) A. 802.11a, IPSec VPN, 802.1x
B) B. 802.11ac, MPLS, 802.3
C) C. 802.11b, PPTP, 802.1x
D) D. 802.11g, MS-CHAP, 802.16
E) E. 802.11n, SSL-VPN, 802.1x
3. Which of the following is used to classify network data for the purpose of providing QoS?
A) A. STP
B) B. VLANs
C) C. SIP
D) D. DSCP
4. Users are reporting their network is extremely slow. The technician discovers pings to external host have excessive response times. However, internal pings to printers and other PCs have acceptable response times. Which of the following steps should the technician take NEXT?
A) A. Determine if any network equipment was replaced recently
B) B. Verify malware has not disabled the users' PC firewalls
C) C. Replace users' network cables with known-good network cables
D) D. Power cycle the web server
5. A contractor is setting up and configuring conference rooms for a convention. The contractor sets up each room in the conference center to allow wired Internet access going to individual tables. The contractor measured the distance between the hotel's patch panel to the jack, and the distance is within Cat 5e specifications. The contractor is concerned that the room will be out of specification if cables are run in each room from the wall jacks. Which of the following actions should the contractor take to ensure the cable runs meet specifications and the network functions properly?
A) A. Place a switch at the hotel's patch panel for connecting each room's cables
B) B. Place a switch on each table to ensure strong connectivity
C) C. Place repeaters between the patch panel and the rooms
D) D. place a switch at the wall jack and run the cables in the room from there
1. Right Answer: B
Explanation:
2. Right Answer: E
Explanation:
3. Right Answer: D
Explanation:
4. Right Answer: A
Explanation:
5. Right Answer: A
Explanation:
Explanation:
2. Right Answer: E
Explanation:
3. Right Answer: D
Explanation:
4. Right Answer: A
Explanation:
5. Right Answer: A
Explanation:
Tags:
comptia it exams it certification exams it certifications 2023 comptia exam comptia certification comptia questions comptia a+ comptia exam prep comptia 2023 compti prep materials comptia practice exams questions and answers practice tests test question test comptia a+ comptia a+ 1001 comptioa a+ 1002 comptia casp comptia cloud comptia cysa comptia it fundamentals comptia linux comptia network+ comptia security+ linux essentials0 Comments
Categories
Recent posts
CA Foundation Business Economics Questions 2023 - Part 31
Fri, 03 Mar 2023
CA Foundation Business Economics Questions 2023 - Part 30
Fri, 03 Mar 2023
Leave a comment