1. An administrator wishes to use KVM remotely to monitor and control a server farm. In order to perform this function:

A) remote control must be disabled on each server.
B) the host must be reachable via the IP address.
C) a serial cable must be available.
D) a monitor must be attached to every server.



2. An IT manager needs to purchase client access licenses for servers. The network has ten workstations and 100 on-site users. Which of the following licensing models should the systems administrator recommend ?

A) per user licensing
B) per CPU licensing
C) per operating system licensing
D) per device licensing



3. A server is giving a fault code indicating that a RAM chip is producing errors and should be replaced. According to best practices,which of the following is the proper sequence of steps to replace the faulty module?

A) Attach ESD protection,baseline configuration,open server case,replace module,close server case
B) Open server case,replace module,attach ESD protection,close server case,baseline configuration
C) Open server case,baseline configuration,attach ESD protection,replace module,close server case
D) Attach ESD protection,open server case,replace module,close server case,baseline configuration



4. A server administrator is setting up a new set of hosts for an application that requires communication between all the hosts on a dedicated private subnet. Initially,the configuration consists of four hosts and is expected to grow to 48 total as the application is implemented for the entire company. When configuring the private subnet,which of the following CIDR netmasks would allow for the full number of hosts once the application is fully in production with the least number of unused addresses allocated?

A) /28
B) /27
C) /25
D) /26



5. A server administrator is updating the kernel for servers during the middle of the work day. After defining the steps required to perform this scope of work,which of the following would be the NEXT step needed to complete this task?

A) Request an impact analysis report
B) Perform the system updates
C) Schedule time to perform updates
D) Determine MTTR