1. Assuming that preempt is not configured, when does a router in an HSRP group assume the role of the active router for the group?

A) A router in standby status will become the active router when it does not detect three consecutive hello messages from the activerouter.
B) A router in standby status will become the active router when it does not detect any hello messages from the active router within the configured holdtime
C) A router in listening status will become the active router when it does not detect any hello messages from the active router within the configured holdtime.
D) A router in standby status will become the active router if it has a higher priority than the active router



2. What is a similarity between OM3 and OM4 fiber optic cable?

A) Both have a 9 micron core diameter
B) Both have a 50 micron core diameter
C) Both have a 62.5 micron core diameter
D) Both have a 100 micron core diameter



3. In which HSRP state is the router a candidate to become the next active router for the group?

A) Listen
B) Learn
C) Backup
D) Standby
E) Initial


4. Which three methods can be used to manage Cisco APs that are running autonomously? (Choose three.)(Select 3answers)

A) WLC
B) Web interface
C) WLSE
D) CLI



5. Which characteristics apply to multilayer switching? (Choose three.)(Select 3answers)

A) Determines the forwarding path based on the Network layer address
B) Provides isolation of the collision domain
C) Uses CPU-based packet forwarding
D) Provides Network-layer and Transport-layer access controls
E) Performs collision detection