1. What feature allows the administrator to put phones into a separate logical network from the data network while keeping both in the same physical network?

A) 802.1Q
B) marking
C) auxiliary VLANs
D) queuing



2. Which IOS command configures a switch for VTP client mode?

A) vtp mode client
B) vtp terminal
C) no vtp mode
D) no vtp v2-mode



3. Which protocol is used to maintain the contents of the Cisco Express Forwarding (CEF) adjacency table?

A) PING
B) ARP
C) INARP
D) RARP



4. You must add a new switch to the existing network using VTP to maintain the VLAN databases. Which mode should be configured on this switch so that VLANs can be separately maintained on this switch?

A) Transparent
B) None
C) Server
D) Client



5. What is the easiest way to force a specific switch to become the spanning-tree root bridge for a VLAN?

A) Lower the spanning-tree priority value on the switch
B) Raise the spanning-tree priority value on the switch.
C) Raise the port-cost value of an interface on the switch
D) Lower the port-cost value of an interface on the switch